4th Gen Toyota 4Runner Rock Sliders, Toyota Rock Sliders, ShrockWorks

4th Gen Toyota 4Runner Rock Sliders

Toyota 4Runner Rock Sliders, Rock Rails, Rocker Protection Nerf Bars

The most vulnerable area on any vehicle while off-roading is the rocker panels. The factory nerf bars and aftermatet tube steps on the 4Runner look nice, but they are made of a thin material and will quickly buckle with even a moderate blow while driving offroad causing even greater damage.

ShrockBars are the strongest rock sliders available for to armor Toyota 4Runner. Only the best an strongest materials are used. The tube portion is 1.75" x 0.134 thick tubing. This tubing has a very high strength to weight ratio and is used in applications such a roll cages for race cars. ShrockBars will allow to charge ahead offroad with no fear of damage to your rocker panels!

ShrockWorks rock sliders also function as excellect steps to get in the vehicle or reach the roof rack! Most designs do not stick out far enough to be useful for this.

Protecting your 4Runner does not have to mean giving up a lot of ground clearance either. The angled sweep of the side tubes on ShrockWorks rock sliders allows for excellent clearance and also provides great protection for fending side impacts.

Side impacts are another extremely common source of damage offroad. If you are in a tight spot and slip sideways, it is often your door which takes the blow. The stick-out of the tube portion fends off side impacts while also provide a convenient step up into your rig.

Installation:
Only basic Hand Tools required. All new hardware provided.

Specifications:
- Weight: 118 lbs.
- Materials: 1.75"x.134 wall Round Tubing
- 2"x2"x3/16" wall square tubing
- 1/4" plate mounting pads.
- XREAS Compatible
- Powder coated in semi-gloss black, dark semi-matt dark Gray or Bare Steel.
- SOLD AS A SET (Driver & Passenger)

Options pics:
- Extra Center Support. Two come std. (pic)

Individually handmade to order by skilled craftsman in in Houston, TX USA.

Details

Manufacturer ShrockWorks

Part #: T4RN4-ROKS-01A

Fits: Toyota 4Runner 2003-2009

$494.00

Options

XREAS

Select Finish

Tube Supports

Quantity

Reviews

Customer Reviews

Author: Steven Ibanez I have beat the hell out of my sliders and love them! The install took less than 15 minutes and the fit and finish was excellent. The sliders have saved my 4Runner over rocks, around trees and allow me to use obstacles as pivot points when navigating tight paths. More pics here: http://034runner.blogspot.com/
Author: Jason Byrne Let me first say these sliders are of extremely high quality. For me the installation took about 5 hours. I thought I would list some tips that weren't included in the instructions. The front clamps are the toughest. Although the rock sliders are made to high tolerances, the amount of weld spooge on the bottom of your frame rails will vary. I suppose you could grind some but I found that by applying force from the jack at different parts of the bottom of the "U" clamp on the slider, I could sort of get it to bend around the weld a little. Also on one side the legs of the U kind of spread so I had to bend them back using the bolt and nut with no washers. After I got a bend in there I could add washers back. Another thing not mentioned is that you need to un-clip the brake lines to get clearance for the bolt on the drivers side front. If you use a big flat head screwdriver you can pry the white brake line clip down off the attachment post. There are some tight spaces that you need to jam your hand in so be prepared for some lost skin. So after a bit of swearing I got them installed and am very satisfied. BTW I have a 2007 4runner sr5. Jason
Add your review here

Your name:
Your message:
Enter number in image:

search

Shop By Category

Info

Your cart

Login